Origin	China
Model Number	FP-SB Kit--Hi/Low Beams
Brand Name	PHOHP

phohp-Bulb
1)The inner and outside tube are made by Philips from Netherlands
2)The tube Electrode is made by Newsylvania from USA
3)The purity of mercury is reach to 99.999999% 
4)Presently,In china as the leader of equipment and production line which import from Korea
5)Strongly resist ultraviolet in china
6)Best permeability of bulb tube in china
7)Xenon with high purity and best protection is made by Messers from Germany
8)The tube atmospheric pressure beyond 6A to increase Luminous flux,protect the electrode and prolong the bulb's life
8)Luminous flux is adequate to protect the electrode and prolong the bulb's life
9)The input wire is the original that using in brand car of "VW" 
10)The ballast which we manufacture is according to the parameter of bulb,then match each other very well
11)The bulb voltage range is between:85V+/-10V,However the international standard is 85V+/-17V
12)If you are interested of this pls trying to measure the bulb dimester?The diameter of tube is 8.9~9.2mm,but other is 8.6~8.8mm,then you can distinguish it through diameter
phohp-Ballast
1)The firslty creation in the world,Without concussion for bulbs when HID start,Prolong 2 times of bulb lifespan.
2)Cold bulb switch current is < 6A,you know the original fuse is 7.5A,if the switch current is too high will be damage the original circuit and most of the other suppliers is over 10A.
3)Hot bulb switch current is <3.5 A,no affection to the car's device when you change the lighting from high to low.However most of other suppliers are over 10A.
4)Hot bulb switch power is <35W,it will not damage the tube when we start the hot bulb.However most of other suppliers are over 75W.
5)Cold bulb switch power is <52.5W,it will not damage the tube and the arc.However most of other suppliers are over 105W.
6)When the vehicle vibrating,the power change is less than 1W,will not damage the arc.However many other suppliers are over 3W.